I have already placed the DCS bracket in my 2008 f350 with an 2007 CR 5.9
Do I even need this pedal bracket if I purchase the digital cruise? Also - Do I keep the JMS connector box for the throttle? I assume yes.
Thanks
Intake turned out great
In the process of swapping. Burned a valve and mangled a piston on the ol 6.0. Always wanted an f350 that made Cummins noises.
Main harness will follow here. Picking up on the studs and will have a movement loop between engine and body.
Currently all dressed up and nowhere to go. Converter will be here next week. Turbo blanket because I really dislike how close the starter solenoid is to the housing.
Plans are keeping the VGT and stock injectors. Will post more as I button it up.
All bolted up to trans. Setting on the lower mounts. Have to adjust them to favor passenger side and set down as far as possible. Factory measurements off the 6.0 had center of fan 1” to the passenger side. This is currently 1” to the driver side.
Here is how to wire your fan; Amazon China fans is all I use. "Low" will always show, but it will work just fine.
Here is the conversion for 6.4 trucks, using a 03 CR clutch.
Ford-->Cummins/Dodge
pin 1 to pin 1
pin 2 to pin 6
pin 3 to pin 2
As long as you have a throttle module my cruise will work with it